SpeedFun Furious Evo easy+ for Specialized Turbo Levo, Turbo Kenevo and Turbo Tero (1.1, 1.2, 2.1 and 2.2 motors)

The function of the Furious Evo tuning device for Specialized is to electronically manipulate the rotation speed of the rear wheel and to communicate to the motor a speed always lower than 25 KmH in order to obtain a real speed with very high active motor. The maximum speed limit will therefore be dictated by the power of the motor added to the power expressed by one’s legs.

When the tuning device is active, having no communication with the TCU/TCD, it will show the halved data on any display (or app) starting from a certain threshold.

This device can be installed on Specialized Turbo Levo, Turbo Kenevo, Turbo Tero, Turbo Como and Turbo Vado ebike with Brose motor (officially “Turbo 1.1”, “Turbo 1.2”, “Turbo 2.1” and “Turbo Full Power System 2.2”) equipped with TCU1/TCU2 “MasterMind” or TCD. Also compatible with Specialized gen1 ebikes (ebike control on the battery).

The Furious Evo tuning device for Specialized can be activated/deactivated at will with a very practical system (for further information, consult the instructions) and maintains the setting after the ebike is turned off.

The device is supplied plug and go ready to use and is installed in a very simple way thanks to the compatible connectors with which no physical modification of the ebike is necessary.

The tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula:

Speed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth / Rear Chainring Teeth * 60 [min/h] / 1.000.000 [mm/km]

After installation, your tuning kit will be activated with the activation of your eBike. This tuning kit can be activated / deactivated also, but only by your choice, you do not need to do it everytime you turn on ebike.

IMPORTANT Activation and deactivation:
- Turn Off the ebike.
- Place the chain on the longest gear (the smallest rear sprocket).
- Position the left pedal at 11:00. From now on, do not turn the rear wheel.
- Turn On the ebike and wait for the complete check. Don't spin the rear wheel (not yet ..).
- Raise the rear wheel, give a strong pedal (only one, by feet). Let the wheel spin over 30 km/h for a few seconds.
The system recognizes the acceleration and considers it as a command to activate or deactivate (cyclically) the speed release. Upon activation, the display (if present) shows the speed that passes from real to manipulated in the manner described above. When deactivated, the display shows the speed change from manipulated to real and the bike returns to its original condition.

SpeedFun Ribelle is a tuning for Specialized ebikes with Brose Specialized 2.1 and 2.2 motors ONLY. Works with TCU, TCU Mastermind and TCD displays!

Tested e-bikes with SpeedFun Ribelle for Brose Specialized 2.1 and 2.2 motors, this list is illustrative not exhaustive

– Specialized Turbo Kenevo Expert
– Specizlied Turbo Kenevo Comp
– Specizlied Turbo Levo Hardtail Comp M5
– Specialized Turbo Levo Hardtail M5
– Specialized S-Works Turbo Levo
– Specialized Turbo Levo Pro
– Specialized Turbo Levo Expert
– Specialized Turbo Levo Comp M5
– Specialized Turbo Levo M5
– Specialized Turbo Levo Comp Alloy G3
– Specialized Turbo Levo Alloy G3
– Specialized S-Works Turbo Levo G3
– Specialized Turbo Levo Pro Carbon
– Specialized Turbo Levo Expert G3
– Specialized Turbo Levo Comp Carbon
– Specialized Turbo Levo Comp Alloy
– Specialized Turbo Levo Carbon
– Specialized S-Works Turbo Levo Carbon
– Specialized Turbo Tero 5.0
– Specialized Turbo Tero 4.0 EQ
– Specialized Turbo Tero 4.0
– Specialized Turbo Tero 3.0
– Specialized Turbo Tero 3.0 Step-Through

When connecting the SpeedFun chip to an eBike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.

Please note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedFun products. Electric bikes equipped with SpeedFun products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedFun products can be used exclusively on private property and entirely at one’s own risk.

The use of SpeedFun may void the warranty of your ebike. We strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.

Warranty does not cover damage resulting from eBike software updates. Remove the tuning kit before updating the software. Check with us first to ensure the kit is compatible with your updated eBike. We cannot guarantee that the kit will function the same after updates. Please exercise caution.