SpeedFun Furious Evo easy+ for Ananda M80 and AM80 Agile (Gen.1)

The function of the Furious Evo easy+ tuning device for Ananda M80 and Atala AM80 Agile (Gen. 1) motor is to electronically manipulate the rotation speed of the rear wheel and to communicate to the motor a speed always lower than 25 KmH in order to obtain a very high real speed with the motor active . The maximum speed limit will therefore be dictated by the motor power added to the power expressed by your legs

The tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This guarantees a smooth motor control without speed limit interruptions. Depending on a tuning kit, some determine when assistance stops, while others remove the restriction entirely for continuous support. However, the achievable speed mostly depends on the eBike model. Achievable speed can be calculated using a simple formula:

Speed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth / Rear Chainring Teeth * 60 [min/h] / 1.000.000 [mm/km]

After installation, your tuning kit will be activated with the activation of your eBike. This tuning kit can be activated / deactivated also, but only by your choice, you do not need to do it everytime you turn on ebike.

IMPORTANT Activation and deactivation:
- Turn off the ebike.
- Place the chain on the longest gear (the smallest rear sprocket).
- Position the left pedal at 11.00. From now on, do not turn the rear wheel.
- Turn on the ebike and wait for the complete check. Don't spin the rear wheel (not yet ..).
- Lift the rear wheel off the seat or frame. Don't spin the rear wheel (not yet ..).
- Give a strong pedal stroke (only one). Let the wheel spin over 30 km / h for a few seconds.
The system recognizes the rotation acceleration and interprets it as a command to activate or deactivate (cyclically) the speed release. Upon activation, the display (if present) shows the speed that passes from real to manipulated in the manner described above. When deactivated, the speed changes from manipulated to real on the display and the bike returns to its original condition.

This tuning is specifically designed for Ananda M80 and Atala AM80 Agile (Gen. 1) motors mounted mostly on Atala, Olympia, Nakamura (Intersport), Scrapper, Woodsun E-Reflex (Leclerc) ebikes. This tuning allows the active assistance to be increased up to speeds that can reach 60 km/h, making full use of the motor.

Compatible with:
Motors:
- Ananda M80 BBTR Central Motor
- Ananda M80 AGILE (Atala)
- Nakamura M80

Display:
- Compatible with all display models

Not Compatible with: This device is not compatible with Atala AM80 Agile (Gen. 2) motor. The product compatible with Atala AM80 Agile (Gen. 2) motor is available HERE

E-bikes with Ananda M80 and Atala AM80 Agile (Gen. 1) motor where the Furious Evo easy+ device has been successfully installed: Atala Califfo ebike, Atala Clever 6.2 Lady e Clever 6.2 Man, Olympia Magnum man

When connecting the SpeedFun chip to an eBike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.

Installation Guide:

Please note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedFun products. Electric bikes equipped with SpeedFun products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedFun products can be used exclusively on private property and entirely at one’s own risk.

The use of SpeedFun may void the warranty of your ebike. We strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.

Warranty does not cover damage resulting from eBike software updates. Remove the tuning kit before updating the software. Check with us first to ensure the kit is compatible with your updated eBike. We cannot guarantee that the kit will function the same after updates. Please exercise caution.